Battery strap
News source: Ningbo De Zhi Hardware Technology Co., Ltd. [ 2018-12-14 ]
Methods to improve the technical level of precision die parts
With the continuous development of China's economic skills, precision mold industry will adhere to high-speed growth and drive the development of precision mold parts manufacturing industry. China's hardware and Precision Mould accessories market is unusual and lively, because the production cost of China's hardware mold is relatively low, along with the improvement of mold making skills and quality improvement. The precision mold parts produced in China will not only reduce the import of China's molds, but also may gradually open the foreign markets, and the export of mould will be carried out very much.
However, the production skills of China's precision mold parts are the same as the basic national conditions in China. The mold industry in China still belongs to the developing mold industry. In the field of mould production, there is still a big distance from the developed countries. To expand the mold shopping mall in China, the mould supermarket in China should also improve the Chinese essence. The skill level of dense mold parts and the level of improvement can be carried out in the following three aspects.
1. integration level of progress skills and tooling planning.
2., improve the planning and production level of large, precise, messy, long life molds.
3., develop high speed machining skills, improve appearance processing skills, improve standardization level and expand the use of standard parts.
Gradually improve the skill level of China's precision mold parts, improve the quality of mold and expand the scope of use, and then expand the precision mold accessories shopping malls.
News source: Ningbo De Zhi Hardware Technology Co., Ltd. [ 2018-4-8 ]
Discuss the development characteristics and progress of mould industry
In the more than one year of the world financial crisis, or for a longer period of time, in addition to the quantity of mould sales, what are the development features and progress of our industry? I think the following are the following points:
First, the structural adjustment has achieved certain results. There are three main manifestations as follows: first, the effectiveness of institutional reform and mechanism transformation. At present, there are few state-owned enterprises, which only account for less than 3% of the whole industry in terms of quantity and production and marketing. The share system, private and foreign-funded enterprises have taken up absolute advantages, and the vitality of the whole industry is further strengthened; and two is large, precise, complex and long. The proportion of high and middle grade moulds with high technology content which is the main representative of the life mold has been steadily increasing; three is the continuous improvement of the market structure, and the new industries are being paid much attention to, such as the new energy field, medical equipment (appliance, apparatus), automation, Aerospace and rapid economic mold. The international market also has a wide history. In addition to the traditional markets in Europe, America and Southeast Asia, emerging markets such as India, Russia, Brazil, Australia, the Middle East and South Africa have begun to expand.
Two, the trend of overseas mold transfer to our country is developing continuously, which has led to the continuous improvement of the industry level and the rapid growth of exports. As the cost advantages of domestic mold production continue to exist, so on the one hand, foreign investment, and the purchase of mould, the international mould is further developing to our country. Because of the need to integrate with the world, we speeded up our progress.
Three, cluster production mode has been further developed. According to Luo Bai Hui survey, there are more than 100 different types and different forms of mold City (garden, District, and agglomeration production base), of which more than half of them have formed a certain scale. In 2008, the output of mould city has reached about 27 billion yuan, of which the mold is about 17 billion yuan left and right, the scale effect has been reflected. Moreover, the development of the cluster mode of production has made great contributions to the development of the modern manufacturing service industry in the domestic mould industry and the development of the industrial chain with the core of the mold. At present, the mode of cluster production is still developing, and the overall posture is good.
Four, the mold production cycle is further shortened, and the mold price continues to decline. This is really a pressure for mold manufacturers, but for die users, this is the result. At the same time, this is also a manifestation of technological progress in mould industry. But there is also a problem of irregular market, excessive price competition and overcapacity of middle and low grade products. We should pay enough attention to it.
About the level of domestic mould industry, the goal of "11th Five-Year" mold industry development plan is to enter the ranks of advanced Asian level by 2010. I think this goal can be achieved. In terms of quantity, we are now the world's largest mould producer. From the product level, for the complete set of automobile moulds for the B class and the following grade cars and other passenger cars and commercial vehicles, the precision of the electronic industry is 2 u m, the precision high speed multi position progressive die with more than 200 million times, the single mold weight more than 100 tons, the large multi position grade of up to 6 meters. Many high level molds, such as molds, light guide plates, disc moulds, biochips and moulds, can all be produced. However, Guangdong has a wide area, many different parts of the mold enterprises are uneven, and the gap between each other is very large. In terms of the comprehensive level, there are still a lot of gaps between the J and the international advanced level. The aim of the struggle in time.
On the development trend of the mold, it depends mainly on two aspects, that is, the development trend of all walks of life for the mold service, on the other hand, the development trend of the whole society and the world science and technology, which is actually the need and the possibility. Mold is for the manufacture of parts, that is, forming products service, so the mold must be the development trend of the parts (forming products) for their development trend, the mold must meet their requirements. The development trend of the products is mainly lightweight, elegant, fast and efficient production, low cost and high quality, each of which indicates the development trend of the die. The brief analysis is as follows: it will increase the use of plastic and the development of new materials, including new plastics, modified plastics, metal plastics, magnesium alloys, composite materials and so on. For example, more and more high strength plates are used to lighten the weight of the car. The hot forming of some super high strength plates and the hot forming moulds adapted to it will naturally become the trend of development and so on. To be beautiful, it requires beautiful appearance and no defects in the interior, which requires fine, precise and high quality moulds to match with them.
At present we are fine big gap, fine is often neglected, work not completed. Fast and efficient production, this is the requirement for the mold enterprise to shorten the mold production cycle as soon as possible and deliver the mold to the die users as soon as possible. On the other hand, the more important thing is to use the mould that you provide to produce the products quickly and efficiently. For example, the first mock exam multi cavity multi piece production, stack mold, good use of hot runner technology to shorten the time of forming and using multilayer technology, mold decoration technology, RHCM injection technology, online examination
News source: Ningbo De Zhi Hardware Technology Co., Ltd. [ 2018-4-8 ]
International mold industry is constantly shifting to China's mold market.
China's mold industry average annual growth rate of 20%, rapid development, rapid growth.
The world manufacturing production base is accelerating to China, and China's manufacturing industry is upgrading rapidly. These factors lead to the demand for high-quality precision molds. China's mold market attracts the attention of international mold enterprises as magnet.
In recent years, the new expansion of international mold making giant in China has been in full swing. Jilin, Germany, Jilin, Japan, TOYOTA molds Tianjin factory; Finland Ross Ross Co., Ltd., which is invested and built by Finland Co., Ltd., has been formally put into production to provide high-grade mould products for telecommunications, health care, electronics and automobile industries. The new campaign of international mold industry giants to accelerate the march into the Chinese market has started. As the support of the national and local industrial policies has promoted the prosperity of the domestic mold market, it has also attracted more and more international capital to transfer to the country, which has two reasons.
First, international capital has seen the Chinese market. China has rich labor resources, natural resources and technical resources. China has become the second largest automobile producer in the world, and has become a manufacturing base in the world.
The two is that multinational companies purchase molds in China, especially the middle and low end molds. The purchase quantity is very large. This has led to the export of the mould in China objectively, also reduced the international market die price, and also made our country become the center of international mould industry transfer.
News source: Ningbo De Zhi Hardware Technology Co., Ltd. [ 2018-4-8 ]
